NILE CHEMICALS
ALIZARIN RED S
Synonyms: Mordant Red 3 (Anthraquinone family);
Alizarin red; CI 58005
CAS No.: 130-22-3
Molecular Weight: 342.26
Chemical Formula: C14H7O7SNa
----------------------------------
Inhalation: Causes irritation to the respiratory tract. Symptoms may
include coughing, shortness of breath.
Ingestion: No information found, but compound should be handled as a
potential health hazard. May cause irritation to the gastrointestinal tract.
Symptoms may include nausea, vomiting and diarrhea.
Skin Contact: Causes irritation to skin. Symptoms include redness,
itching, and pain. May cause dermatitis.
Eye Contact: Causes irritation, redness, and pain.
Chronic Exposure: No information found.
Aggravation of Pre-existing Conditions: No information found.
Inhalation: Remove to fresh air. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen. Get medical
attention.
Ingestion: Induce vomiting immediately as directed by medical personnel.
Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Remove any contaminated clothing. Wash skin with soap or
mild detergent and water for at least 15 minutes. Get medical attention if
irritation develops or persists.
Eye Contact: Immediately flush eyes with plenty of water for at least 15
minutes, lifting lower and upper eyelids occasionally. Get medical attention
immediately.
Fire: As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Explosion: Fine dust dispersed in air in sufficient
concentrations, and in the presence of an ignition source is a potential dust
explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or
carbon dioxide.
Special Information: In the event of a fire, wear full protective
clothing and NIOSH-approved self-contained breathing apparatus with full
facepiece operated in the pressure demand or other positive pressure mode.
Remove all sources of ignition. Ventilate area of leak or
spill. Wear appropriate personal protective equipment as specified in Section 8.
Spills: Clean up spills in a manner that does not disperse dust into the air.
Use non-sparking tools and equipment. Reduce airborne dust and prevent
scattering by moistening with water. Pick up spill for recovery or disposal and
place in a closed container.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Airborne Exposure Limits:
None established.
Ventilation System:A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions of the
contaminant at its source, preventing dispersion of it into the general work
area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of
Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):For conditions of use where
exposure to dust or mist is apparent and engineering controls are not feasible,
a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil
particles (e.g. lubricants, cutting fluids, glycerine, etc.) are present, use a
NIOSH type R or P filter. For emergencies or instances where the exposure levels
are not known, use a full-face positive-pressure, air-supplied respirator.
WARNING: Air-purifying respirators do not protect workers in oxygen-deficient
atmospheres.
Skin Protection:Wear impervious protective clothing, including boots,
gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:Use chemical safety goggles and/or full face shield where
dusting or splashing of solutions is possible. Maintain eye wash fountain and
quick-drench facilities in work area.
Other Control Measures:There is insufficient data in the published
literature to assign complete numerical SAF-T-DATA* ratings and laboratory
protective equipment for this product. Special precautions must be used in
storage, use and handling. Protective equipment for laboratory bench use should
be chosen using professional judgment based on the size and type of reaction or
test to be conducted and the available ventilation, with overriding
consideration to minimize contact with the chemical.
Appearance: Yellow to orange powder.
Odor: No information found.
Solubility: Sparingly soluble in water.
Specific Gravity: No information found.
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: 430C (806F) (sublimable)
Melting Point: 287 - 289C (549 - 552F)
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
Stability: Stable under ordinary conditions of use
and storage.
Hazardous Decomposition Products: Burning may produce carbon monoxide,
carbon dioxide, sulfur oxides, and nitrogen oxides.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizers.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.
Environmental Fate: No information found.
Environmental Toxicity: No information found.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
Not regulated.
Disclaimer: Nile Chemicals. provides the
information contained herein in good faith but makes no representation as to its
comprehensiveness or accuracy. This document is intended only as a guide to the
appropriate precautionary handling of the material by a properly trained person
using this product. Individuals receiving the information must exercise their
independent judgment in determining its appropriateness for a particular
purpose. NILE CHEMICALS. MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH
HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, NILE
CHEMICALS. WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE
UPON THIS INFORMATION.
Product range
Ph Indicator | Chemicals Lab Bulk | Catalyst | Food Colour | Herbs | Intermediates |
Cesium Salts | Ion Pair Reagents | Direct Dyes | Contact details | Acid Dyes | Solvents |
PRODUCT LIST
nilesh@nilechemicals.com sales@nilechemicals.com